Building Your Own Hydroponics System

Building your own hydroponics system isn’t as hard as you may think. All you have to do is follow the right instructions and you can create a system to provide your plants with water. If you don’t have enough space for the garden of your dreams, then you need to learn about hydroponics. All the essential nutrients will be mixed in with the water supply in order to provide each plant with everything it needs to survive and grow.

By building your own hydroponics system, your plants will all grow faster. This is especially good if you grow and sell them. You can expect a higher yield if they grow quickly. You can also save a lot of money by enjoying them all year round. You can expect a fresh supply of high quality vegetables and foliage on a regular basis with your own hydroponics system.

There are DIY guides that will teach you how to build the system. To get started, you will need a container such as a bucket or fish tank. It should have the same dimensions (l x w) from top to bottom. This will be the reservoir, and you will need to paint it black. You will need to keep track of how much water you put in, so make sure you have measuring tape ready.

You will also need Styrofoam. It should be ¼” smaller than the dimensions of the reservoir. For instance, if the reservoir dimensions are 34” in length and 18” in width, the Styrofoam should be cut to 33 ¾” x 17 ¾”. However, if the top of the reservoir is larger in dimension than the bottom, the Styrofoam should be at least two inches smaller in order to fit appropriately. There needs to be enough room to add water.

Before you place the Styrofoam in the reservoir, you need to cut some holes. Set the net pots on top of it in the places you plan on placing the plants. With a sharp object, cut the Styrofoam around the bottom of the pots. You also need to cut a hole on one end for the air line. Space the plants appropriately around the Styrofoam so that each can receive an adequate amount of light.

The last main step in building your own hydroponics system is to choose a pump and connect the air line to the bottom of the reservoir. A good hydroponics supply store should recommend the right size pump for you. They come in gallons of at least two, so you need to get one large enough for your reservoir. Hopefully, the pump will come with the air line. If not, then make sure you order one that will extend from the pump to the bottom of the reservoir.

Always keep your reservoir filled with a good nutrient solution so that your plants will receive everything they need in order to grow. This guide just provides the basics for building your own hydroponics system, so if you have any trouble, you can look over a more detailed DIY guide and watch how-to videos.

This entry was posted on Saturday, November 14th, 2009 at 11:12 pm and is filed under Articles. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.